Tires are essential to the vehicle, hence the need to pay special attention to them. Keep on reading these tips by Certified Lube in Houston to learn about their seasonal upkeep and extend their useful life!

If you are looking for synthetic oil products, AMSOIL has a whole new range that's worth checking out! Visit their online store or call (281) 705-9296 to have one of the professionals at Certified Lube assist you and give your vehicle a synthetic oil change in Houston.

How Often Should You Change the Tires?

Some drivers would suggest every four, five, or even eight to ten years, depending on the wear or damage. Tires generally last between 27,000 and 45,000 miles. But don't rely entirely on this metric since the quality, the weather, and the ground where they move play defining lifespan roles.

Be Mindful of Your Driving Habits

Acceleration and braking can reduce the life of your tires by 80%, so if you are a fan of making your engine roar, know that the tires will suffer the most from reckless habits.

Don't Forget to Check the Pressure

Having 20% ​​less of the air needed can reduce your tires' life by up to 30%. Try to measure the pressure regularly using a vulcanizer, or your meter, to counteract this problem. Also, turn to the car's manual whenever you need to verify the tires' recommended pressure and spare your vehicle from this problem.

If You Are Going to Mix Tires, Keep This in Mind

When installing two new tires, ensure they are the same size and sample as your current ones. When placing them, ask that the new tires remain on the rear axle of the car. Since new tires provide better grip on wet surfaces, this placement will reduce the chances of skidding or losing stability on slippery roads. Remember, taking care of your tires is an excellent investment for your vehicle to make your trips a more pleasant experience.

Summer is here, and it's time to give your car a synthetic oil change in Houston. Call Certified Lube at (281) 705-9296 or visit AMSOIL's website to learn more about synthetic oil products.

It's Time to Lose the Dread of Changing a Tire

It happens to everyone; you're on your way, and you get a flat tire when you least expect it; o worst, when you least need it. Being in this scenario could stir anxiety in even some of the savviest drivers, but you'll get stuck on the road if you don't pull through the situation. Here are three keys that you must not forget when changing a tire:

Tools and Safety

To change the tire of a car, you must make sure that the vehicle is in a safe place, on a flat surface, and with the brake on so that it doesn't move. Tools are required, so your car should always have a spare tire, a wedge (a piece of wood, even a stone), a cross wrench, and a hydraulic jack.

Raise the Car

After you've settled the car, use the wedge to secure the vehicle. Remember: if you are going to change the front tire, the wedge is in the back, and if the rear tire needs to be changed, the wedge will have to be fixed on the front tire. Next, carefully loosen the lug nuts with the car still on the ground; they tend to turn clockwise but don't remove them entirely as of yet. If you don't know where to put the hydraulic jack, you'd better look near the wheel for a small part integrated into the chassis and serves to place the jack; proceed to lift it carefully with the vehicle up to remove the nuts.

Put the Rim in Place

After the lug nuts have been removed, switch the damaged tire, and fit the spare tire in return. Place the tire caps in the center, and then tighten the nuts moderately. You can carefully lower the vehicle and finish tightening the nuts with the cross wrench while the car is on the ground. Once the rim is secured correctly, remove the hydraulic jack. Store the tools in the trunk when you finish, and off you go.

Lastly,

It's time to get rid of that fear; practice at home by changing a tire, so when you have to do it, you feel confident to do it correctly. Suppose you have questions about the condition of your tires or any component of your vehicle. In that case, you can always go to your technical service and ask your mechanic to solve your doubts that might arise.

Signature Series 0W-40 Synthetic Motor Oil by AMSOIL withstands heat and thermal disruptions, gives the highest lubrication in hard-working motors, and exceeds the highest industry standards. If you need help, call the oil specialists at Certified Lube to get the choicest synthetic oil formula for your car. Call (281) 705-9296 to learn more about AMSOIL goods or place your order.